大家知道研磨机的种类很多，并且陶瓷是研磨机制成的重要材料之一。还有一种常见的研磨机叫做陶瓷研钵式研磨机，陶瓷研钵式研磨机的组成很简单，主要有研磨棒和陶瓷研钵这两者组成的，那么这两者是怎样安装的?陶瓷研磨棒，将陶瓷研棒本身所配套使用的有一个专用螺钉，把螺钉拧进陶瓷研棒内螺的纹路孔中，适量的拧紧，也不要太过于紧。设备上装置了一个橡胶的缓冲垫板，而陶瓷研钵则放在该垫的中央位置上，然后用3件螺杆笔直的立起来后把压圈压住在研钵上并且将其固定压紧。同样也可以用玛瑙研棒，具体的操作方法与陶瓷研磨棒相同。
因为研磨棒所安装们置在该机器的摆臂上，由于摆臂是固定的并且是在研磨棒上的动力头输出轴的位置上，研磨棒动力头所安装的位置是在一个可以上下活动的滑动座上，这样螺杆就可以调节滑座，从而可以上下的移动。在研磨机进行工作时，研磨棒的动力头被快速的转动起来，并且研磨棒也随着被转动。可以根据所需要达到的研磨效果来确定研磨棒和研钵的位置，松紧情况根据实际情况而定。如果位置被确定下来，操作者在上移研磨棒完成后，然将研钵安装好，接着应转动手轮再将研磨棒总成停留在原来的高度位置上，必要时可以做位置记号。
中译英：
We know that many kinds of grinding machine, grinding machine made and the ceramic is one of important material. There is also a common grinding machine called ceramic mortar type grinding machine, ceramic mortar type grinding machine composition is simple, mainly a grinding rod ceramic mortar and the combination of both, so both of which is how to install? Ceramic grinding rods, ceramic pestle itself by supporting the use of a special screw, the the screw is screwed into the ceramic pestle inner screw line hole, proper tightening, also not too tight. A device of a rubber cushion board, ceramic mortar on the pad of the central position, and then use the 3screw straight up after the pressure ring presses in mortar and the fixing and pressing. Can also use the agate pestle, specific operation method and ceramic grinding rod is the same.
Because the grinding rod installation are arranged in the machine on the swing arm, the swing arm is fixed and is in the grinding power head rod on the position of the output shaft, a grinding rod power head mounting position is in a can move up and down sliding seat, so that the screw can adjust the sliding seat, which can move under. In the grinding machine working, the grinding rod power head is fast turning up, and also as the grinding rod is rotated. According to the need to achieve the grinding effect to determine the pestle and mortar positions, the tightness according to actual circumstances. If the locations is determined, the operator moves the grinding rod in complete, but will mortar installed, then we should turn the handwheel to the grinding rod assembly stay the same height position, when necessary, can do position mark.
(图/文http://www.qitaibio.com/)
加入收藏
